Description
ANYCUBIC Photon Mono M5s and Wash and Cure 3 Plus Station, Resin 3D Printer Bundles
View AllClose
- 【12K Exquisite Details】Anycubic Photon Mono M5s has a 10.1 inch 12K monochrome LCD screen with a resolution of 11520*5120, achieving an X accuracy of 19 microns. It can print with exceptional detail, as fine as a human hair. The contrast ratio is 480:1, making models have sharp edges and distinct contours.
- 【Leveling-Free】Anycubic pioneered the consumer grade leveling free resin 3D printer. During printing, the mechanical sensor on the cantilever arm detects the fit between the printing platform and the floating leveling module and automatically adjusts it based on the detection results. This can eliminate the tedious manual leveling process and achieve right out of the box
- 【3X Faster Printing】Photon Mono M5s uses high-speed resin to achieve an average printing speed of 105mm/h*, and is equipped with a high-speed release film, which reduces the release force and increases the speed while ensuring a high printing success rate
- 【Higher Compatibility】Anycubic Wash and Cure 3 Plus upgraded the washing size 8.97''x5.03''x10.23''. And compared with Wash & Cure Plus, the washing volume of the washing basket is increased by about 13.4% to 7.6L, which is suitable for more LCD 3D printers like Photon Mono M5s, Saturn 3 series or other 10.6 inches and below.
- 【Flexicure Gooseneck Light】Due to the innovative Flexicure gooseneck light design, Wash & Cure 3 Plus can increase the energy value by 30,000uW/cm²* in the 1~3cm irradiation range, which greatly enhances the solidification effect of the top of the model, the figure skirt, and other subtle areas, plus the light tube can be twisted, making it more convenient to use
